Contact us  ask a question

CC 3300

Remote climate control system

Dantherm CC 3000
  • Features

    • Operational security – configuration parameters stored in on-board, non-volatile memory
    • Access via standard browser – WEB GUI for remote monitoring, configuration, data collection, change of operational mode, firmware upgrades, backup and restore
    • Ready for remote control – configurable digital input/outputs supporting remote monitoring/control
    • Intelligent monitoring – ethernet SNMP
    • Easy configuration and logging – built-in SD card reader
    • Clear, user-friendly display – on-board 2,4 inch TFT colour display
    • Flexible operation – on/off and capacity-regulated control of fans/compressor
    • Wide operating supply voltage – 85-265V AC (ext. AC/DC converter)
    • Quick change of temp. set point – on display
    • Real-time clock/calendar – requires battery
    • MODbus TCP/IP

    Connections

    • Connection for analogue pressure sensor (filter monitoring)
    • Connection for analogue humidity sensor (operational mode change)
    • Connection and capacity control for two free cooling units
    • Euro type spring loaded pluggable connectors
    • Galvanically insulated alarm output (insulation voltage: 500V)
    • TTL Link serial connection for TTL/USB cable for laptop

    Options

    • SD card
    • Serial TTL/USB adapter.(Standard adapter for use with standard terminal PC software)
    • Humidity sensor
    • Pressure sensor
  • Telecom cooling

    Customised solutions for the telecom and network industry...read more

  • Commercial/Industrial Catalogue

    Dantherm Group

    Commercial/Industrial Catalogue

  • Specifications Units CC 3000
    Input
    DC supply voltage range V 40-60
    Digital 1, 2, 3 Pull up to 12V. For use with dry contact
    Room/hotspot sensor °C -30 - +85 NTC type NTCLE100E3272GB0
    Humidity sensor I2C
    Pressure sensor I2C
    Output
    AC 1, 2 0/24V DC 200mA or dry contact
    FB 1, 2 8-way multi cable
    Heater 24V DC AUX 0/24V DC 200mA or dry contact
    Alarm 1-10 Dry contact
    Damper 1, 2 0/24V DC 200mA
    Communication
    Opto-insulated TTL +, -, TX, RX AMP – 281698-6
    Ethernet RJ 45 w. shield
    Memory
    Onboard EEprom 1K non volatile Storage of operating parameters
    Mass storage device <32 GB SD Flash For logging and change of parameters
    Operational temperature range, min./max. °C -45 - +85
    Display inch 2.4 TFT colour w. back light
    Product size (h x w x d) mm 200 x 215 x 90
To Cool
  • linkedin
  • youtube

Contact (UK)

Jeremy Neale

Commercial Dehumidification
Direct: +44 (0)1621 878 534
Mobile: +44 (0)7432 744 722

Contact Jeremy